CLIA Kit for Contactin 1 (CNTN1)

F3; Glycoprotein gP135; Neural cell surface protein F3

  • CLIA Kit for Contactin 1 (CNTN1) Packages (Simulation)
  • CLIA Kit for Contactin 1 (CNTN1) Packages (Simulation)
  • CLIA Kit for Contactin 1 (CNTN1) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Contactin 1 (CNTN1)

This assay has high sensitivity and excellent specificity for detection of Contactin 1 (CNTN1).
No significant cross-reactivity or interference between Contactin 1 (CNTN1) and analogues was observed.

Precision of the CLIA Kit for Contactin 1 (CNTN1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Contactin 1 (CNTN1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Contactin 1 (CNTN1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the CLIA Kit for Contactin 1 (CNTN1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Contactin 1 (CNTN1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Contactin 1 (CNTN1)

The microplate provided in this kit has been pre-coated with an antibody specific to Contactin 1 (CNTN1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Contactin 1 (CNTN1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Contactin 1 (CNTN1) level in the sample or standard.;

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPB201Mu02 Recombinant Contactin 1 (CNTN1) Positive Control; Immunogen; SDS-PAGE; WB.
RPB201Mu01 Recombinant Contactin 1 (CNTN1) Positive Control; Immunogen; SDS-PAGE; WB.
PAB201Mu01 Polyclonal Antibody to Contactin 1 (CNTN1) WB; IHC; ICC; IP.
PAB201Mu02 Polyclonal Antibody to Contactin 1 (CNTN1) WB; IHC; ICC; IP.
SEB201Mu ELISA Kit for Contactin 1 (CNTN1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB201Mu CLIA Kit for Contactin 1 (CNTN1) Chemiluminescent immunoassay for Antigen Detection.
LMB201Mu Multiplex Assay Kit for Contactin 1 (CNTN1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK