High Sensitive ELISA Kit for Urocortin 2 (UCN2)

URP; SRP; UCN-II; UCNII; Stresscopin-Related Peptide; Urocortin-related peptide

  • High Sensitive ELISA Kit for Urocortin 2 (UCN2) Packages (Simulation)
  • High Sensitive ELISA Kit for Urocortin 2 (UCN2) Packages (Simulation)
  • High Sensitive ELISA Kit for Urocortin 2 (UCN2) Results demonstration
  • HEC585Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Urocortin 2 (UCN2).
No significant cross-reactivity or interference between High Sensitive Urocortin 2 (UCN2) and analogues was observed.

Recovery of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

Matrices listed below were spiked with certain level of recombinant High Sensitive Urocortin 2 (UCN2) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Urocortin 2 (UCN2) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 81-104 85
EDTA plasma(n=5) 86-102 95
heparin plasma(n=5) 97-104 101

Precision of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Urocortin 2 (UCN2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Urocortin 2 (UCN2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Urocortin 2 (UCN2) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 92-101% 78-97% 87-95% 80-89%
EDTA plasma(n=5) 91-105% 97-104% 85-95% 79-96%
heparin plasma(n=5) 80-104% 79-88% 84-104% 94-102%

Stability of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Urocortin 2 (UCN2)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Urocortin 2 (UCN2). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Urocortin 2 (UCN2). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Urocortin 2 (UCN2), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Urocortin 2 (UCN2) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPC585Hu01 Recombinant Urocortin 2 (UCN2) Positive Control; Immunogen; SDS-PAGE; WB.
PAC585Hu01 Polyclonal Antibody to Urocortin 2 (UCN2) WB,IHC
LAC585Hu71 Biotin-Linked Polyclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC.
LAC585Hu81 FITC-Linked Polyclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC; IF.
MAC585Hu24 Monoclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC; IP.
MAC585Hu25 Monoclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC; IP.
MAC585Hu22 Monoclonal Antibody to Urocortin 2 (UCN2) WB
MAC585Hu21 Monoclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC; IP.
MAC585Hu23 Monoclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC; IP.
LAC585Hu72 Biotin-Linked Monoclonal Antibody to Urocortin 2 (UCN2) WB; IHC; ICC.
HEC585Hu High Sensitive ELISA Kit for Urocortin 2 (UCN2) Enzyme-linked immunosorbent assay for Antigen Detection.
SEC585Hu ELISA Kit for Urocortin 2 (UCN2) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC585Hu Multiplex Assay Kit for Urocortin 2 (UCN2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSC585Hu01 Antibody Pair for Urocortin 2 (UCN2) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSC585Hu01 ELISA Kit DIY Materials for Urocortin 2 (UCN2) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK