High Sensitive ELISA Kit for Interleukin 28A (IL28A)

IFNL2; Interferon,Lambda 2; Cytokine Zcyto20

  • High Sensitive ELISA Kit for Interleukin 28A (IL28A) Packages (Simulation)
  • High Sensitive ELISA Kit for Interleukin 28A (IL28A) Packages (Simulation)
  • High Sensitive ELISA Kit for Interleukin 28A (IL28A) Results demonstration
  • HEB689Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Interleukin 28A (IL28A).
No significant cross-reactivity or interference between High Sensitive Interleukin 28A (IL28A) and analogues was observed.

Recovery of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

Matrices listed below were spiked with certain level of recombinant High Sensitive Interleukin 28A (IL28A) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Interleukin 28A (IL28A) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 91-98 94
EDTA plasma(n=5) 82-94 89
heparin plasma(n=5) 96-103 99

Precision of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Interleukin 28A (IL28A) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Interleukin 28A (IL28A) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Interleukin 28A (IL28A) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 86-93% 94-101% 89-96% 80-104%
EDTA plasma(n=5) 89-97% 78-98% 96-104% 93-101%
heparin plasma(n=5) 98-105% 84-98% 79-96% 79-95%

Stability of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Interleukin 28A (IL28A)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Interleukin 28A (IL28A). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Interleukin 28A (IL28A). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Interleukin 28A (IL28A), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Interleukin 28A (IL28A) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
APB689Hu01 Active Interleukin 28A (IL28A) Cell culture; Activity Assays.
RPB689Hu01 Recombinant Interleukin 28A (IL28A) Positive Control; Immunogen; SDS-PAGE; WB.
PAB689Hu01 Polyclonal Antibody to Interleukin 28A (IL28A) WB; IHC; ICC; IP.
MAB689Hu24 Monoclonal Antibody to Interleukin 28A (IL28A) WB; IHC; ICC; IP.
MAB689Hu26 Monoclonal Antibody to Interleukin 28A (IL28A) WB; IHC; ICC; IP.
MAB689Hu21 Monoclonal Antibody to Interleukin 28A (IL28A) WB,IHC
MAB689Hu22 Monoclonal Antibody to Interleukin 28A (IL28A) WB; IHC; ICC; IP.
LAB689Hu76 Biotin-Linked Monoclonal Antibody to Interleukin 28A (IL28A) WB; IHC; ICC.
SEB689Hu ELISA Kit for Interleukin 28A (IL28A) Enzyme-linked immunosorbent assay for Antigen Detection.
HEB689Hu High Sensitive ELISA Kit for Interleukin 28A (IL28A) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB689Hu CLIA Kit for Interleukin 28A (IL28A) Chemiluminescent immunoassay for Antigen Detection.
LMB689Hu Multiplex Assay Kit for Interleukin 28A (IL28A) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSB689Hu01 Antibody Pair for Interleukin 28A (IL28A) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSB689Hu01 ELISA Kit DIY Materials for Interleukin 28A (IL28A) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK