High Sensitive ELISA Kit for Caspase 3 (CASP3)
CPP32; CPP32B; SCA1; Apoptain; Yama; Apoptosis-Related Cysteine Peptidase; Cysteinyl Aspartate Specific Proteinases 3; SREBP cleavage activity 1
- Product No.HEA626Ra
- Organism SpeciesRattus norvegicus (Rat) Same name, Different species.
- Test MethodDouble-antibody Sandwich
- Assay Length3h
- Detection Range31.2-2,000pg/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 12.1pg/mL.
- Sample Typetissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Download Instruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
-
FOB
US$ 526
For more details, please contact local distributors!US$ 752
For more details, please contact local distributors! US$ 3384
For more details, please contact local distributors! US$ 6392
For more details, please contact local distributors! US$ 52640
For more details, please contact local distributors!
-
Packages (Simulation)
-
Packages (Simulation)
-
Results demonstration
-
Typical Standard Curve
-
ISO9001: 2008, ISO13485: 2003 Registered
Specificity of the High Sensitive ELISA Kit for Caspase 3 (CASP3)
This assay has high sensitivity and excellent specificity for detection of High Sensitive Caspase 3 (CASP3).
No significant cross-reactivity or interference between High Sensitive Caspase 3 (CASP3) and analogues was observed.
Precision of the High Sensitive ELISA Kit for Caspase 3 (CASP3)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Caspase 3 (CASP3) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Caspase 3 (CASP3) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Stability of the High Sensitive ELISA Kit for Caspase 3 (CASP3)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the High Sensitive ELISA Kit for Caspase 3 (CASP3)
1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.
Test principle of the High Sensitive ELISA Kit for Caspase 3 (CASP3)
The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Caspase 3 (CASP3). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Caspase 3 (CASP3). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Caspase 3 (CASP3), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Caspase 3 (CASP3) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
GIVEAWAYS
INCREMENT SERVICES
Related products
| Catalog No. | Organism species: Rattus norvegicus (Rat) | Applications (RESEARCH USE ONLY!) |
| RPA626Ra02 | Recombinant Caspase 3 (CASP3) | Positive Control; Immunogen; SDS-PAGE; WB. |
| RPA626Ra01 | Recombinant Caspase 3 (CASP3) | Positive Control; Immunogen; SDS-PAGE; WB. |
| APA626Ra03 | Active Caspase 3 (CASP3) | Cell culture; Activity Assays. |
| PAA626Ra04 | Polyclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IP. |
| PAA626Ra02 | Polyclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IP. |
| PAA626Ra03 | Polyclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IP. |
| PAA626Ra01 | Polyclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IP. |
| LAA626Ra71 | Biotin-Linked Polyclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC. |
| LAA626Ra81 | FITC-Linked Polyclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IF. |
| MAA626Ra21 | Monoclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IP. |
| LAA626Ra82 | FITC-Linked Monoclonal Antibody to Caspase 3 (CASP3) | WB; IHC; ICC; IF. |
| HEA626Ra | High Sensitive ELISA Kit for Caspase 3 (CASP3) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| SEA626Ra | ELISA Kit for Caspase 3 (CASP3) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| MEA626Ra | Mini Samples ELISA Kit for Caspase 3 (CASP3) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| LMA626Ra | Multiplex Assay Kit for Caspase 3 (CASP3) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |
| KSA626Ra01 | ELISA Kit DIY Materials for Caspase 3 (CASP3) | Main materials for "Do It (ELISA Kit) Yourself". |