ELISA Kit for Syndecan 1 (SDC1)

CD138; SDC; SYND1; Syndecan Proteoglycan 1

  • ELISA Kit for Syndecan 1 (SDC1) Packages (Simulation)
  • ELISA Kit for Syndecan 1 (SDC1) Packages (Simulation)
  • ELISA Kit for Syndecan 1 (SDC1) Results demonstration
  • SEB966Ra.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Syndecan 1 (SDC1)

This assay has high sensitivity and excellent specificity for detection of Syndecan 1 (SDC1).
No significant cross-reactivity or interference between Syndecan 1 (SDC1) and analogues was observed.

Recovery of the ELISA Kit for Syndecan 1 (SDC1)

Matrices listed below were spiked with certain level of recombinant Syndecan 1 (SDC1) and the recovery rates were calculated by comparing the measured value to the expected amount of Syndecan 1 (SDC1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 80-101 93
EDTA plasma(n=5) 80-93 81
heparin plasma(n=5) 88-101 91

Precision of the ELISA Kit for Syndecan 1 (SDC1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Syndecan 1 (SDC1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Syndecan 1 (SDC1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the ELISA Kit for Syndecan 1 (SDC1)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Syndecan 1 (SDC1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 85-94% 83-94% 81-104% 88-101%
EDTA plasma(n=5) 95-103% 98-105% 78-98% 95-102%
heparin plasma(n=5) 96-103% 93-105% 82-101% 84-98%

Stability of the ELISA Kit for Syndecan 1 (SDC1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Syndecan 1 (SDC1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Syndecan 1 (SDC1)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Syndecan 1 (SDC1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Syndecan 1 (SDC1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Syndecan 1 (SDC1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Syndecan 1 (SDC1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Rattus norvegicus (Rat) Applications (RESEARCH USE ONLY!)
RPB966Ra02 Recombinant Syndecan 1 (SDC1) Positive Control; Immunogen; SDS-PAGE; WB.
RPB966Ra01 Recombinant Syndecan 1 (SDC1) Positive Control; Immunogen; SDS-PAGE; WB.
PAB966Ra02 Polyclonal Antibody to Syndecan 1 (SDC1) WB; IHC; ICC; IP.
PAB966Ra01 Polyclonal Antibody to Syndecan 1 (SDC1) WB; IHC; ICC; IP.
LAB966Ra81 FITC-Linked Polyclonal Antibody to Syndecan 1 (SDC1) WB; IHC; ICC; IF.
MAB966Ra21 Monoclonal Antibody to Syndecan 1 (SDC1) WB; IHC; ICC; IP.
SEB966Ra ELISA Kit for Syndecan 1 (SDC1) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB966Ra Multiplex Assay Kit for Syndecan 1 (SDC1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB966Ra01 ELISA Kit DIY Materials for Syndecan 1 (SDC1) Main materials for "Do It(ELISA Kit) Yourself"
GUESTBOOK