CLIA Kit for Paraoxonase 1 (PON1)

ESA; PON; Esterase A; Serum paraoxonase/arylesterase 1; Aromatic esterase 1; A-esterase 1; Serum aryldialkylphosphatase 1

  • CLIA Kit for Paraoxonase 1 (PON1) Packages (Simulation)
  • CLIA Kit for Paraoxonase 1 (PON1) Packages (Simulation)
  • CLIA Kit for Paraoxonase 1 (PON1) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Paraoxonase 1 (PON1)

This assay has high sensitivity and excellent specificity for detection of Paraoxonase 1 (PON1).
No significant cross-reactivity or interference between Paraoxonase 1 (PON1) and analogues was observed.

Recovery of the CLIA Kit for Paraoxonase 1 (PON1)

Matrices listed below were spiked with certain level of recombinant Paraoxonase 1 (PON1) and the recovery rates were calculated by comparing the measured value to the expected amount of Paraoxonase 1 (PON1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 88-101 95
EDTA plasma(n=5) 82-101 97
heparin plasma(n=5) 80-99 91

Precision of the CLIA Kit for Paraoxonase 1 (PON1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Paraoxonase 1 (PON1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Paraoxonase 1 (PON1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the CLIA Kit for Paraoxonase 1 (PON1)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Paraoxonase 1 (PON1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 89-97% 79-98% 78-94% 88-105%
EDTA plasma(n=5) 78-99% 87-102% 95-103% 80-94%
heparin plasma(n=5) 81-93% 82-99% 86-94% 89-96%

Stability of the CLIA Kit for Paraoxonase 1 (PON1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Paraoxonase 1 (PON1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Paraoxonase 1 (PON1)

The microplate provided in this kit has been pre-coated with an antibody specific to Paraoxonase 1 (PON1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Paraoxonase 1 (PON1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Paraoxonase 1 (PON1) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPA243Hu02 Recombinant Paraoxonase 1 (PON1) Positive Control; Immunogen; SDS-PAGE; WB.
RPA243Hu01 Recombinant Paraoxonase 1 (PON1) Positive Control; Immunogen; SDS-PAGE; WB.
APA243Hu01 Active Paraoxonase 1 (PON1) Cell culture; Activity Assays.
RPA243Hu03 Recombinant Paraoxonase 1 (PON1) Positive Control; Immunogen; SDS-PAGE; WB.
RPA243Hu04 Recombinant Paraoxonase 1 (PON1) Positive Control; Immunogen; SDS-PAGE; WB.
RPA243Hu05 Recombinant Paraoxonase 1 (PON1) Positive Control; Immunogen; SDS-PAGE; WB.
PAA243Hu01 Polyclonal Antibody to Paraoxonase 1 (PON1) WB; IHC; ICC; IP.
PAA243Hu02 Polyclonal Antibody to Paraoxonase 1 (PON1) WB; IHC; ICC; IP.
LAA243Hu71 Biotin-Linked Polyclonal Antibody to Paraoxonase 1 (PON1) WB; IHC; ICC.
LAA243Hu81 FITC-Linked Polyclonal Antibody to Paraoxonase 1 (PON1) WB; IHC; ICC; IF.
MAA243Hu22 Monoclonal Antibody to Paraoxonase 1 (PON1) WB; IHC; ICC; IP.
SEA243Hu ELISA Kit for Paraoxonase 1 (PON1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA243Hu CLIA Kit for Paraoxonase 1 (PON1) Chemiluminescent immunoassay for Antigen Detection.
LMA243Hu Multiplex Assay Kit for Paraoxonase 1 (PON1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA243Hu01 ELISA Kit DIY Materials for Paraoxonase 1 (PON1) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK