CLIA Kit for Lactoferrin (LTF)

HLF2; LF; GIG12; Lactotransferrin; Growth-inhibiting protein 12; Talalactoferrin; Lfcin-H; Kaliocin-1

  • CLIA Kit for Lactoferrin (LTF) Packages (Simulation)
  • CLIA Kit for Lactoferrin (LTF) Packages (Simulation)
  • CLIA Kit for Lactoferrin (LTF) Results demonstration
  • SCA780Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Lactoferrin (LTF)

This assay has high sensitivity and excellent specificity for detection of Lactoferrin (LTF).
No significant cross-reactivity or interference between Lactoferrin (LTF) and analogues was observed.

Recovery of the CLIA Kit for Lactoferrin (LTF)

Matrices listed below were spiked with certain level of recombinant Lactoferrin (LTF) and the recovery rates were calculated by comparing the measured value to the expected amount of Lactoferrin (LTF) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 96-103 101
EDTA plasma(n=5) 83-94 90
heparin plasma(n=5) 97-104 101

Precision of the CLIA Kit for Lactoferrin (LTF)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Lactoferrin (LTF) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Lactoferrin (LTF) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the CLIA Kit for Lactoferrin (LTF)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Lactoferrin (LTF) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 88-97% 92-105% 92-102% 96-105%
EDTA plasma(n=5) 94-102% 92-99% 80-101% 90-101%
heparin plasma(n=5) 86-93% 84-103% 79-97% 78-105%

Stability of the CLIA Kit for Lactoferrin (LTF)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Lactoferrin (LTF)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Lactoferrin (LTF)

The microplate provided in this kit has been pre-coated with an antibody specific to Lactoferrin (LTF). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Lactoferrin (LTF). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Lactoferrin (LTF) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
NPA780Hu01 Native Lactoferrin (LTF) Positive Control; Immunogen; SDS-PAGE; WB.
APA780Hu01 Active Lactoferrin (LTF) Cell culture; Activity Assays.
RPA780Hu01 Recombinant Lactoferrin (LTF) Positive Control; Immunogen; SDS-PAGE; WB.
RPA780Hu02 Recombinant Lactoferrin (LTF) Positive Control; Immunogen; SDS-PAGE; WB.
PAA780Hu01 Polyclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC; IP.
PAA780Hu02 Polyclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC; IP.
PAA780Hu05 Polyclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC; IP.
LAA780Hu81 FITC-Linked Polyclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC; IF.
LAA780Hu71 Biotin-Linked Polyclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC.
MAA780Hu22 Monoclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC; IP.
LAA780Hu72 Biotin-Linked Monoclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC.
LAA780Hu82 FITC-Linked Monoclonal Antibody to Lactoferrin (LTF) WB; IHC; ICC; IF.
SEA780Hu ELISA Kit for Lactoferrin (LTF) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA780Hu CLIA Kit for Lactoferrin (LTF) Chemiluminescent immunoassay for Antigen Detection.
LMA780Hu Multiplex Assay Kit for Lactoferrin (LTF) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA780Hu01 ELISA Kit DIY Materials for Lactoferrin (LTF) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK